Don’s REPRODUCTIONS
Japanese Militaria Parts List
T-26 Revolver and Nambu Pistols
T-26 Revolver
Cost
Per Item Name of Part
$75 Lanyard
Assembly (stud, securing ring, lanyard ring & screw)
$40 Main Spring
$40 Hammer Rebound Lever
$30 Cleaning Rod, polished
steel
$10 Hammer/Sear Bar V Spring
$
5 Grip Screw (2)
$10 Side Plate Hinge Screw
$35 Barrel Hinge Pin and Screw
$30 Cylinder Hand
Nambu Automatic Pistol Type A (Grandpa)
Cost
Per Item Name of Part
$40 Firing
Pin
$85 Magazine Release (body,
button, and spring)
$40 Magazine Follower
$25 Magazine Follower Button
$25 Cleaning Rod, nickel plated
Modified 1902 Type Nambu (Papa)
Cost
Per Item Name of Part
$10 Grip Screw
(2)
$15 Trigger & Grip Safety
Spring
$85 Grip Safety
$20 Lanyard Ring
$
5 Safety Pivot Pin
$40 Firing Pin
$85 Magazine Release (body,
button, spring)
$50 Extractor (if you send
me the bolt, fitting is no charge)
$40 Aluminum Magazine Bottom
$100 Bolt
Lock & Striker Guide, original style checkering
$25 Magazine Follower Button,
nickeled
$25 Cleaning Rod, nickel plated
$40 Sear Bar Pivot Pin
Nambu Automatic Pistol Type B (Baby)
Cost
Per Item Name of Part
$10 Grip Screw (2)
$15 Trigger
& Safety Flat Spring
$ 5 Safety Pivot Pin
$40 Firing
Pin
$85 Magazine Release (body,
button & spring)
$50 Extractor
(if you send me the bolt, fitting is no charge)
$125 Bolt
Lock & Striker, original style checkering
$25 Cleaning
Rod, nickel plated
$40 Sear Bar Pivot Pin
T-14 Nambu
Cost
Per Item Name of Part
$10 Grip
Screw (2)
$30 Firing Pin, Short, .055
dia. tip and .077dia., tip (need to know arsenal and date)
$35 Firing Pin, Long, blued
or polished (need to know arsenal)
$45 Firing pin, Center mount and
extra long, experimental
$30 Firing Pin
Followers/Extension, (need to know arsenal and date)
$35 Firing Pin
Follower/Extension, flat-sided, strawed or blued
$ 8 Firing Pin Spring
$30 Sear Bar
$10 Sear Bar Pivot Pin, two
types
$10 Magazine Safety Button
& Spring Set
$40 Extractor
(if you send me the bolt, fitting is no charge) I can’t guarantee fit
otherwise.
$45 Cocking
knobs, early slotted
$35 Cocking knobs, late solid
$20 Cleaning Rods, blued
$25 Cleaning Rods, nickel
plated
$25 Retip Firing Pins (Also
Grandpa, Papa & Baby & 94)
$40 Safety,
blued
$45 Safety, strawed
$25 Magazine
Retention Spring
$15 Magazine Retention Spring
Rivet Set (2 rivets)
$25 Magazine Follower Button,
blued
$30 Magazine Follower Button,
nickel plated
$ 8 Locking
Block Spring
$ 5 Magazine
Release Spring
$35 Magazine Release
$25 Lanyard Loop
T-94 Nambu
Cost
Per Item Name of Part
$10 Grip
Screw (2)
$20 Barrel Bushing
$30 Firing Pin
$8 Firing Pin Spring
$15 Bolt Cross Pin
$15 Lanyard Ring
$40 Extractor
(if you send me the bolt, fitting is no charge) I can’t guarantee fit
otherwise
$15 Magazine Follower Buttons
(two types, round & rectangular)
$15 Cleaning Rods, blued
$25 Cleaning Rods, nickel
plated
$40 Safety, blued
$45 Safety, strawed
$15 Frame
Screws, Trigger & Hammer Screw (blued or strawed)
T-90 (2 and 3 Barrel Flare Pistol)
Cost
Per Item Name of Part
$10 Frame
Screws
$10 Grip Screws
$10 Barrel Pivot Screw
$60 3 Barrel Cocking Knob
$15 3 Barrel Cocking Knob Screw
$15 3 Barrel Cocking Knob
Spring
$5 3 Barrel Cocking Knob
Securing Pins (2)
T-10 Flare Pistol
Cost
Per Item Name of Part
$40 Main Spring (same as the T-26 Revolver)
$15 Grip
Screw
$10 Grip ScrewThreaded Nut
$10 Grip screw counter sunk escutcheon
plate
$10 Other Frame Screws
$20 Barrel Raising Flat Spring
Rifles
NOTE:
ALL Rifle Cleaning Rods are listed together below.
T-13 Murata Rifle
Cost
Per Item Name of Part
$85 Firing Pin
$50 Firing Pin Spring
$35 Gas Deflection Plate
$25 Bolt Retaining Block
$15 Bolt Retaining Block Screw
$15 Trigger Guard Screws:
front, middle, tang
$30 Bolt Handle End Screw (covers
the firing pin spring)
$85 Extractor
T-18 Murata Rifle and Carbine
Cost Per Item Name
of Part
$85 Firing Pin
$50 Firing Pin Spring
$35 Gas Deflection Plate
$125 Carbine, Gas Deflection
plate/Safety
$20 Bolt Retaining Screw
$30 Bolt Handle End Screw (covers
the firing pin spring)
$10 Trigger guard screw: front,
middle, tang
$85 Extractor
T-22 Murata Carbine
Cost Per Item Name
of Part
$250 Bolt Head Complete
$50 Bolt Head Retainer
$15 Bolt Head Retainer Screw
$50 Ejector
$50 Extractor
$30 Trigger Spring
$10 Trigger Guard Screws:
front, middle, tang
$30 Magazine Tube Follower
$30 Magazine Tube Brass Front
End Cap
$25 Magazine Tube Spring
T-22 Murata Rifle
Cost
Per Item Name of Part
$250 Bolt Head Complete
$50 Bolt Head Retainer
$15 Bolt Head Retainer Screw
$50 Ejector
$55 Extractor and pin
$30 Magazine
Tube Follower
$30 Magazine Tube Brass Front
Tube Cap
$25 Magazine Tube Spring
$10 Trigger Guard Screws:
front, middle, tang
T-30 Rifle and Carbine
Cost
Per Item Name of Part
$10 Trigger Guard Screws:
front, middle, tang
$75 Ejector
$75 Extractor
$75 Bolt Head
$30 Bolt
Rear End Screw Locking Spring
T-35 Rifle
Cost
Per Item Name of Part
$10 Trigger Guard Screws:
front, middle, tang
$75 Ejector
$75 Extractor
T-44 Carbine
Cost
Per Item Name of Part
$15 Bayonet Housing Screw (state
which model—1st, 2nd or 3rd)
$10 Trigger Guard Screws:
front, middle, tang
$75 Bayonet Housing Stacking
Hook Assembly
$75 Rear Barrel Band Machined
for the Bayonet
T-38 Rifle
Cost
Per Item Name of Part
$10 Trigger Guard Screws:
front, middle, tang
$ 5 Butt Plate S crews
T-38 Artillery Rifle
Cost
Per Item Name of Part
$25 Stock Bolt (2) (used in
the threaded sleeves in the butt stock)
Other screws are the same as the
T 38 rifles
T-38 Carbine
Cost
Per Item Name of Part
$10 Trigger Guard Screws:
front, middle, tang
$75 Rear Barrel Band
T-97 Sniper Rifle
Cost
Per Item Name of Part
$70 Bolt Body Only (I supply
the bolt body, no extractor, firing pin or safety.)
$50 Bolt
Body Only (You supply the bolt body)
$100 Scope Mount Block
$10 Scope Mount Block Screws
(4)
$ 5 Scope
Mount Block Register Pins (2)
$50 Flat,
Scope Retaining Spring
$10 Flat, Scope Retention
Spring Screw
$10 Trigger Guard Screws:
front, middle, tang
$15 Cleaning Rod Retention
Stud, (for late screw-in rods)
$75 Rear Barrel Band, Kokura
$70 Monopod
Assembly, Nagoya Only
$70 2.5X
Scope, Steel Knurled Eye Cup Retainer Ring
$25 2.5X Scope, Resin Knurled
Eye Cup Retainer Ring
$200 2.5X
Scope Locking Lever Assembly
$50 2.5X Scope Rubber Eye Cups
$150 2.5X Solid Resin Scopes,
includes the scope, eye cup and eye cup retainer ring:
eye cup and ring can be used on the original
2.5X scope. Can be used with the T-99 cut back sniper rifles.
T-1 Folding Stock Carbine
Cost
Per Item Name of Part
$30 Latch
$30 Rear Hinge Screw with
Spanner Nut
$50 Front Hinge Screw with Wing
Nut, Wing Nut Stop and Screw
$25 Latch Disengagement Spring
$10 Butt plate screws
$10 Trigger Guard Screws:
front, middle, tang
T-99 Long Rifle
Cost
Per Item Name of Part
$10 Front and Rear Band Screws
$15 Rear Sight Wing (right or
left)
$ 8 Rear
Sight Wing Screws (2)
$10 Trigger
Guard Screws: front, middle, tang
$15 Monopod Bolt, Nut Assembly
$20 Monopod Springs (per set)
$30 Monopod Block & Pivot
Pin
$25 Monopod
Wire
$70 Complete Monopod assembly
(#5, 6, 7 & 8)
T-99 Short Rifle
Cost
Per Item Name of Part
$10 Front and Rear Band Screws
$15 Rear Sight Wing (right or
left)
$ 8 Rear
Sight Wing Screw (2)
$10 Trigger
Guard Screws: front, middle, tang
$15 Monopod
Bolt, Nut Assembly
$25 Monopod Springs
$25 Monopod Block & Pivot
Pin
$25 Monopod Wire
$70 Complete Monopod assembly
(#4, 5, 6 & 7)
$15 Cleaning Rod Retention
Stud, (for late screw-in rods)
T-99 Sniper Rifle
Cost
Per Item Name of Part
$70 Bolt
Body Only *I supply the bolt body, no
extractor, firing pin or safety
$50 Bolt
Body Only *You supply the bolt body
$100 Scope Mount Block
$10 Scope Mount Block Screw (4)
$ 5 Scope
Mount Block Register Pins (2)
$50 Flat, Scope Retaining
Spring
$10 Flat, Scope Retention
Spring Screw
$10 Front and Rear Barrel Band Screws
$10 Trigger Guard Screws:
front, middle, tang
$70 4X Nonadjustable Scope,
Steel Knurled Eye Piece Ring
$50 4X Rubber Eye Cup
$75 T-99 4 Power Adjustable
Scope, Rear Knurled Eye Piece Ring
$20 T-99 4 Power Adjustable
Scope Adjusting Screws
$50 T-99 Power Adjustable Scope
Adjusting Screw Cap
$15 Cleaning Rod Retention
Stud, (for late screw-in rods)
$150 2.5X Solid Resin Scopes,
includes the scope, eye cup and eye cup retainer ring:
eye cup and ring can be used on the original
2.5X scope. Used with the T-99 cut back sniper rifles.
T-99 Special Naval Rifle
Cost
Per Item Name of Part
$10 Trigger Guard Screws:
front, middle, tang
$10 Rear Band Screw
$10 Front Band Screws
T-100 Experimental Paratroop Rifle
Cost
Per Item Name of Part
$10 Front and Rear Band Screws
$10 Trigger Guard Screws:
front, middle, tang
$150 Bolt Handle (unscrews from the bolt body)
T-2 Paratroop Rifle
Cost
Per Item Name of Part
$10 Front and Rear Band Screws
$10 Trigger Guard Screws:
front, middle, tang
$10 Front Junction Band Long
Screws
$10 Rear Junction Band Short
Screws
$75 Barrel Retention Wedge
Block Assembly
$10 Wedge Block Retention Screw
(bottom of receiver)
$20 Wedge
D Ring
$25 Wedge Retention Nut (D ring fits into this nut)
$75 Rear
Barrel Hold Down Strap
All Rifle Cleaning Rods
Cost
Per Item Name of Part
$30 T-13/18 Murata Rifle and
T-18 Carbine
$30 T-35 & T-30 Brass Tip,
Rifle & Carbine
$25 T-38
Long, Short, Carbine and T-1 Folding Stock Carbine
$25 T-44 Section (2 needed)
state which model they are for.
$15 T-99 (4 7/8 in): 5th, 24th,
and 34th Series
$20 T-99 Late (5 3/4 in): 23rd to
early 24th series
$25 T-99 Short Rifle (23 3/4 in)
$25 T-99 Long Rifle (29 3/16 in)
$25 T-100 and T-2 Paratrooper (21
5/16 in)
$25 T-1 Italian-made Rifle (6.5
mm)
$20 Child’s Trainer (7/8 in)
$20 T-99 Shibata Trainer
$30 Mexican Arisaka: Rifle or
Carbine
$15 Naval Special T-99: short rod
$25 Japanese VZ 24
$15 Trainer Cleaning Rod (4 1/2
in) Pointed End, Drive In
$25 T-46/1903 Siamese Mauser
$30 T-66
Siamese (T-38 copy)
$30 T-47
Siamese Carbine (15 7/8 in)
T-38, 6.5 mm Rifle Squad Cleaning Kit
Components
Cost Per Item Name
of Part
$25 Cleaning
Rod Sections (2)
$25 Steel
Brush Protector
$35 Folding
Screwdriver (a multi-purpose screwdriver that also fits in the T-10 Flare
Pistol Holster, Rifle Squad Cleaning Kits and 96/99 LMG Cleaning Kits)
$25 Brass Rotating Jag Tip
$40 Wood Bolt Cleaning Rod Guide
$25 Chamber Cleaning Tool (hockey
stick)
T-99, 7.7 mm Rifle Squad Cleaning Kit
Components
Cost Per Item Name
of Part
$25 Cleaning Rod Sections (2)
$25 Steel Brush Protector
$35 Folding
Screwdriver (a multi-purpose
screwdriver that also fits in the T-10 Flare Pistol Holster, Rifle Squad
Cleaning Kits and 96/99 LMG Cleaning Kits)
$25 Brass Rotating Jag Tip
$40 Wood Bolt
Cleaning Rod Guide
$25 Chamber Cleaning Tool (hockey
stick)
T-96, 6.5 mm Light Machine and Gun Cleaning
Kit Components, etc.
Cost Per Item Name
of Part
$35
Folding Screwdriver (a multi-purpose
screwdriver that also fits in the T-10 Flare Pistol Holster, Rifle Squad
Cleaning Kits and 96/99 LMG Cleaning Kits)
$25 Tweezers/Tongs (approx 6 inches long)
$20 Tapered Punch
T-96, 6.5 mm Light Machine Gun And Cleaning
Kit Components, etc.: continued
$25 Gas Cylinder Carbon Scraper
$30 Cleaning
Rod, threaded on 2 Ends, one end for Scraper
$40 Hammer, Brass or Aluminum
$85 Broken Shell Case Extractor
$95 Firing
Pin
$60 Firing Pin Locking Block
w/spring
$50 Rubber Eye Cup For Scope
$10 Small Screw On The Back of
The Scope Base. Right and Left end (3)
$30 Bolt Cleaning Rod, Cleans Out
The Firing Pin Hole And F/P tip hole
$25 Crevice cleaning rod.
T-99, 7.7 mm Light Machine Gun Cleaning and
Maintenance Kit Components, etc.
Cost Per Item Name
of Part
$35 Folding Screwdriver
$20 Tapered Punch
$25 Gas Cylinder Carbon Scraper
$85 Broken Shell Case Extractor
$85 Firing Pin
$55 Firing Pin Locking Block w/
spring
$60 Gas port plug
$75 Extractor Removal Tool
$40 Hammer, Brass or Aluminum
$30 Cleaning rod section
$50 Rubber Eye Cup For Scope
$10 Small Screw On The Back of
The Scope Base, Right And Left End. (3)
$30 Bolt Cleaning Rod, Cleans Out
The Firing Pin Hole And F/P tip hole
$25 Crevice cleaning rod.
T-89
Grenade Discharger (Knee Mortar)
$85 Adj.
Knob Assem: Knurled Knob, Shaft, Securing Nut & Ring
$60 Adjusting
Knob Gear
$75 Trigger, with triangular leather
pull ring (leather pull not included)
$50
Trigger, leather pull
$20
Trigger pin and securing ring
$50
Sear Cog Gear (part of the spare
parts kit)
$25 Striker (firing pin) (part of spare parts kit)
$10
Sear Connector Flat Spring (part
of spare parts kit)
$10 Sear Connector Flat Spring
Screw (part of spare parts kit)
$10 Safety Pin and Pull String
For The 50 mm KM Round Fuse
T-91,
97 and 99 (Kiska) Hand Grenades
$25 T-91 & 97 Grenade, Brass
Firing Pin Holder and Firing Pin Assembly
$30 T-91
& 97 Grenade, External Brass Cover
$10 T-91 & 97 Grenade, Fuse
Safety Pin With Pull String
$30 T-91 & 97 Grenade,
External Brass Firing Pin Tube
$ 8 T-91
& 97 Grenade, Firing Pin Spring
$85 T-91 & 97 Grenade,
Complete Fuse Train Assembly, all the above parts
$15 T-91 & 97 Grenade Internal Brass Fuse Tube
$10 T-91 & 97 Grenade Internal Brass Fuse Tube Cover
$30 T-91 & 97 Grenade Top, Painted Black and Red
$40 T-91
Grenade Booster Charge Assembly
$25 T-99
Kiska Grenade, Brass Cover
$20 T-99 Kiska Grenade, Steel Gas Deflection Cup
$10 T-99 Kiska Grenade, Fuse
Safety Pin w/Pull String
$15 T-91 & 97 Grenade Internal Fuse Tube
$10 T-91 & 97 Grenade Internal fuse tube cover
Miscellaneous
Cost Per Item Name
of Part
$40 T-100 Grenade Launcher Retaining
Pin & Ring, (state which model)
$30 T-100
Grenade Launcher Split BushingT-38 or T-99
$30 T-100
Grenade Launcher Bushing Spring and rivets
$90 T-100
Launcher Bushing & Spring Assembly
$40 T-100
Grenade Launcher Chain (hand made)
$15 T-100
Grenade Launcher Triangular Chain Securing Ring
$130 T-100 Grenade Launcher Complete Attachment
Assembly
$35 T-100
Grenade Launcher Bullet Tube
$75 T-2
Grenade Launcher Securing Handle &
Stop Washer
$15 Aluminum
Handled NCO Sword Tassel Ring
$20 Aluminum Handled NCO Sword
Handle Screw & Nut (brass or steel)
$25 Aluminum
Handled NCO Sword Tassel Ring Sex Screw
$25 Wood Handled NCO Sword,
Screw & Tapered Nut
$10 T-95
NCO Sword Throat Securing Screw
$25 Type
32 Army/Cavalry Sword Grip Screw & Tapered Nut Set
$10 Type 98 Shin-Gunto Drag
Brass retainer screw
$10 T-30 Bayonet Screws
$10 T-30 Bayonet Grip Screw
Washers
$75 T-92 Field Phone Generator
Crank
$45 T-92 Field Phone Ground Rod
$25 Brass Sling Buckle For The
1 1/8 in. Leather Sling
$25 Retip Japanese Rifle &
Pistol Firing Pins, any additional work is extra
$25 German,
Deutsches Sportmodell .22 Rifle (DSM 34) Stacking Rod
$10 German, Deutsches
Sportmodell .22 Rifle (DSM 34) Bolt Release Screw
$30 Gew88&98 F/P Retip, if
just the tip is missing, any additional work is extra
$50 Mle. 1873 11 mm French
Revolver Lanyard Ring Assembly
$80 T-11 MG firing pin
$60 T-11 MG Extractor
$75 T-11 MG extractor springs
$80 T-92 MG firing pins
$60 T-92 MG Extractor
$75 T-92 MG Extractor spring
I may be
able to make other parts not listed. Most of the parts above were requests at
one time or another.
All the parts
above are not originals they are REPRODUCTIONS. Please let me know your needs.
All my parts are
marked with a prick punch mark and a small “R” to denote they are
reproductions.
I will not serial
number the parts to the guns.
Postage
is not included in listed prices.
Thank You!
Don Schlickman
E-mail:
dfsjpn@aol.com
Revised 9-5-15